Last Modified: 11-29-2007 1.6 A
Service Category: Audio/Visual/Telematics Section: Audio/Video
Model Year: 2008 Model: Sequoia Doc ID: RM000002ZX3005X
Title: AUDIO / VIDEO: FRONT DOOR SPEAKER: INSTALLATION (2008 Sequoia)

INSTALLATION

HINT:

  • Use the same procedure for the RH side and LH side.
  • The procedures listed below are for the RH side.

1. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY (for 14 Speakers)

(a) Engage the 3 claws and install the speaker to the lower frame bracket garnish.

NOTICE:

Do not touch the cone part of the speaker.

2. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

(a) Engage the 3 claws.

(b) Install the speaker with the 4 screws.

NOTICE:

Do not touch the cone part of the speaker.

(c) Connect the connector.

3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH DOOR / HATCH: FRONT DOOR: REASSEMBLY (2008 Sequoia)+

4. INSTALL FRONT UPPER ARMREST BASE PANEL RH DOOR / HATCH: FRONT DOOR: REASSEMBLY (2008 Sequoia)+

5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG RH DOOR / HATCH: FRONT DOOR: REASSEMBLY (2008 Sequoia)+

6. INSTALL FRONT LOWER DOOR FRAME BRACKET GARNISH RH DOOR / HATCH: FRONT DOOR: REASSEMBLY (2008 Sequoia)+